Marcas:
























Sensor De Temperatura Y Humedad DHT11
$AR 95.99
(DHT11)

DHT11 Cantidad $AR 95.99
Comentario:
 
Detalles del Producto

This is a low cost humidity and temperature sensor with a single wire digital interface. The sensor is calibrated and doesn't require extra components so you can get right to measuring relative humidity and temperature. DHT11 output calibrated digital signal. It utilizes exclusive digital-signal-collecting-technique and humidity sensing technology, assuring its reliability and stability. Its sensing elements is connected with 8-bit single-chip computer. Every sensor of this model is calibrated in accurate calibration chamber and the calibration-coefficient is saved in type of programme in OTP memory, when the sensor is detecting, it will cite coefficient from memory.

Features:

Relative humidity and temperature measurement
Extra components are not needed
Long transmission distance low power consumption
Dimensions: 12 X 15.5 X 15mm
Outstanding long-term stability and reliability
Low power consumption

Specifications:

Power supply: 3.0 to 5.5V DC
Output signal: digital signal via single-bus
Operating range: humidity 20 to 90% RH, temperature 0 to 50 C
Interchangeability: fully interchangeable
Range of meauring humidity: 20% to 90% RH(0-50C temperature compensation)
Range of meauring temperature: 0 to +50 C
Accuracy of measuring humidity: ±5.0% RH
Accuracy of measuring temperature: ± 2.0 C
Response time: Supply Current:
Mesurement: 0.5 to 2.5 mA
Average: 0.2 to 0.5 mA
Stand by: 100 to 150 uA

Contacto - Consultas

info@labshop.com.ar
www.labshop.com.ar
Tel.: 11-6047-7676
Whatsapp: 54-9-11-6047-7676

Medidor pH acuario - Pololu DRV8825 PAP Driver - RPM - Sensor de Olor - Higrometro datalogger - 4 Relay 5v - 250v 10amp - Refractometro azucar - Display Lcd Grafico 84x48 nokia 5110 con backlight - Higrometro - Tacometro de Contacto - Higrometro datalogger - Arduino Mega 2560 R3 - Tds - LCD 2 filas 16 columnas - Hanna Instruments - Arduino Nano v 3.0 - Brix - Termometro de Contacto -50 a 1300C con sonda tipo K | Precisión 1C - Luxometro - Sensor de Gases explosivos - Tds - Sensor De Humedad De Suelo - Hanna Instruments - Higrometro TA-328 - EC - Solución Limpieza base de electros de pH - Higrometro - Endoscopio / Boroscopio 2mpx 200 aumentos - Higrometro - LCD 2 filas 16 columnas - Hanna - Higrometro Punto de rocio A&V 8010 - Medidor pH acuario - Correlación infrarroja del módulo del sensor fotoeléctrico - PPM - Rodamiento Lineal LM8UU - Boroscopio - Termohigrometro Datalogger Usb KG100, temperatura y humedad - Refractometro 0 32 brix - Refractometro 0 - 18 Brix - Pehachimetro - Boroscopio / Endoscopio USB PC-Android Con Accesorios - PPM - Display Lcd Grafico 84x48 nokia 5110 con backlight - Luxometro - Medidor pH tipo lapiz | 0 - 14pH | Presición 0 .1pH - Luxometro - Certificado de Calibracion de Termometros - Refractometro 0 18 brix - Solución Buffer pH 4,00 ±0,02 - EC - Medidor HI99171 de pH en Papel y Cuero - Hanna Instruments - Sensor Ultrasonico HC-SR04 - Refractometro azucar - Arduino Leonardo R3 - Endoscopio - Reloj Ds1302 - Redox - Analizador de humedad Ohaus MB 25 - Redox - Solución Buffer pH 7,00 ±0,02 - Higrometro - Solución Limpieza de Proteinas de electros de pH - Conductividad - Medidor de Ph Luster Leaf Rapitest 1845 - Medidor pH acuario - Peltier TEC1-12715 - 15.2v - 15amp - 40x40x4mm - Pehachimetro - Solución Buffer pH 4,00 ±0,02 - Termometro Infrarrojo - Rodamiento Lineal LM8UU - Termometro Laser - Arduino Nano v 3.0 - Electroconductividad - Conductimetro de 0 a 9990 ppm | precisión de 1 a 10ppm - Refractometro azucar - Luxometro 100.000 lux LX-1010BS - Tacometro Optico - Electrodo De PH Fourier 0.000 - 14.000 | 0.004 pH De Resolucion - Electroconductividad - Solución Buffer De Conductividad 1382ppm - Conductividad - MEGA Sensor Shield V2.0 - Refractometro 58 92 brix miel - Termometro Pinche -50C ~ 300C TP3001 - Refractometro 58 92 brix miel - Solución Limpieza base de electros de pH - Ohaus - Sensor de Temperatura y Humedad DHT11 - Termometro Laser - Certificado de Calibracion de Medidores de pH - Sipel - Peltier TEC1-12708 - 15.2v - 8amp - 40x40x3.8mm - Boroscopio - Arduino DUE R3 - Tacometro Optico - Balanza de precisión 0.001g a 20g - RPM - Termostato Bimetal KSD97000 -

Con CuentaDigital.com cobre con PagoFacil RapiPago y BaproPagos!
Valores expresados en Pesos AR
e-LABShop ® | www.e-labshop.com | info@e-labshop.com
Tel: 11-3024-2446 | Whatsapp +54-9-11-3024-2446